Attaching the power cord The Kodak i600/i700 Series Scanner is packed with a set of power cords.
1.Select the power cord which complies with your electrical requirements and attach it.
2.Turn on the scanner and wait until the top green LED is lit indicating the scanner has completed
Powering up the host • Turn the power on to the host computer. computer
Scanner components Front view
10
5
12*
4
3
6
1 | 7 |
|
9 8
112
1Elevator tray extender — open the elevator tray extender to accommodate long documents.
2Feed module — provides smooth document feeding of various sizes, thicknesses and textures.
CAUTION:Moving parts, avoid contact.
3Elevator tray side guides — slide the guides in or out to accommodate the document size you want to scan. Side guides can be
4Gap release lever — allows you to manually adjust the space between the feed module and separation roller for documents that require special handling.
5Output tray and end stop — collects the scanned documents. The output tray width and end stop length can be adjusted.
6POD release latch — push up the POD release latch when you need to access the inside of the scanner.
