Manually pausing and resuming the scanner
Automatically pausing and resuming the scanner
Manually ending scanning
While scanning documents:
•Press the Stop/Pause button on the scanner once to pause scanning.
NOTE: Your application may configure the scanner with a transport timeout function which signals an End of Job. If you do not start/ resume scanning before the timeout expires, you cannot continue scanning without restarting the job from the host application.
•Press the Start/Resume button on the scanner to restart scanning after it has been paused.
Stop/Pause button
Start/Resume button
During scanning the scanner monitors its own internal image buffer memory. In order to prevent overwriting images before the host computer can retrieve them, the scanner will automatically pause the feeder while waiting for the host computer to read existing images.
The scanner automatically resumes scanning by restarting the feeder once image buffer memory is cleared. To avoid this situation be sure your host computer meets the minimum system requirements as referred to in Chapter 2.
After feeding the last document to be scanned, you can end scanning by pressing the Stop/Pause button on the scanner twice. An end of job message will be sent to your host application.
You cannot continue scanning without restarting the job from the host application.
