7 Stop/Pause and Start/Resume buttons —
Stop/Pause (white with red triangle) button: press once to temporarily pause scanning (the green button can then use used to resume scanning). Press twice to stop scanning (end of job).
Start/Resume (green) button: to start scanning.
8LEDs— illuminate or flash from top to bottom as follows:
Illuminates when the power is turned on and the scanner is idle. This indicator will flash if the scanner is in “sleep” or lamp saver mode.
illuminates when the scanner is enabled and/or scanning, and flashes when the scanner is powering up.
flashes when a document has jammed in the transport or when a
Illuminates when you need to call Service.
Refer to Chapter 6, Troubleshooting, for complete descriptions of the LED indicators.
9Power switch — press the power switch on (I) or off (O) as required.
10Exit deflector (optional) — aids in document stacking.
11Paper Present Sensor — detects the presence of documents in the elevator tray.
12* Height Adjustment Wire — located underneath the output tray (not shown in photo), this wire can be pulled out to raise the front of the output tray.
