Kodak 8670, 8660 manual Appendix B Command Summary

Appendix B Command Summary

Resets the NIC

SET DEFAULT

Sets the NIC’s parameters to factory defaults

SET LOAD Disable

Disables firmware reload after exit

SET LOAD ENable

Enables firmware reload after exit

SET LOAD HOst <name>

Sets node name of boot host for (NetWare firmware load)

SET LOAD IP aa.bb.cc.dd

Sets IP address of load host (TCP/IP firmware load)

SET LOAD SOfware <filename>

Sets host filename of firmware to load

SET PAssord <password>

Sets console password (default password is ACCESS)

SET PORT P1 BIDIR [ENIDIS]

Enable/disable bidirectional mode on print server

SET PROtect <password>

Set console protection password to prevent access to SET commands (use UNPROTECT command to access SET commands)

SET SERVEr DEscription

Sets node description string displayed with SHOW SERVER command

SET SERVEr STRing n “...”

Defines server BOT/EOT string. Refer to Appendix B.

SET SERVice <servicename><protocol> [ENIDIS]

Enable or disables specified protocol on the specified service.

SET SERVice <servicename> BOT nn

B-2 Part No. 6B4389 June 1999