Installing the Hardware
2. Remove the four screws on the back of the 8660 printer.
3.Remove the back panel.
4.Attach the wrist portion of a static strip to your wrist. Attach the other end of the strap to the metal frame of the 8660 printer.
Slot cover
CAUTION: Wear the antistatic strap during this installation procedure so that you do generate static electricity that can damage the 8660printer.
5.Remove the screws which hold the slot cover for the Network Interface Card in place.
6.Remove the Network Interface Card from the antistatic bag.
Part No. 6B4389 | June 1999 |