Using Configuration Utilities
Using XConfig Utility
The XConfig utility is provided with the NIC for use with Windows operating systems. Use the setup utility to install XConfig along with XAdmin. XConfig is a command line interface that can be used to issue commands and get a status from the NIC.
XConfig and Telnet are equivalent command line interfaces. XConfig does not require a prior address configuration if your system is configured to support IPX. (The NIC can be selected from its default “KOD_xxxxxx_P1” address.) However, Telnet requires that an IP address first be established on the NIC.
1.To start XConfig, either use the Win 95/NT Start > Programs > XAdmin > XConfig mechanism or click on the XConfig executable which is installed in the XAdmin folder.
If you have one printer with a NIC installed, you will are immediately connected. If you have more than one NIC, a screen appears that gives you a list of available NICs.
2. Select the appropriate NIC represented as KOD_xxxxxx_P1.
June 1999 |