Kodak 8660, 8670 manual Appendix B Command Summary, General Server Commands

Appendix B Command Summary

Command line input applies to the use of the following NIC configuration mechanisms:

¥XConfig

•Telnet

•Terminal on NIC Serial Port

When connecting to the NIC, you get a message such as Console Connected or Remote Console Reserved when you are connected. Press RETURN, type the password ACCESS when you get the # prompt, and type anything in response to the Enter Username prompt. Enter commands at the Local>prompt.

NOTE: The commands available are generally a subset of the commands used on terminal servers. There is no distinction between the SET and DEFINE commands or between the CLEAR and PURGE commands. When you type CTRL-D to exit the remote console, any of these commands take effect, and the results are stored permanently. It is not necessary to enter both a SET and a DEFINE to execute a command and save the results.

General Server Commands

CLear SERVErSTRing stringnumber

Removes a string number. Refer to Appendix B for more information.

CLear FAtal

Deletes fatal error log

CLear POrt P1 JOB

clears current entry in the NIC’s internal queue

EXIT/^D

Exits print server console

HElp

Provides information on available commands

INitialize

Part No. 6B4389 June 1999 B-1