Kodak 8670, 8660 Configuring for NDS Using NWAdmin, Configuring for NDS Using JetAdmin or XAdmin

Novell NetWare

Configuring for NDS Using NWAdmin

Refer to your NWAdmin documentation for specific details on using NWAdmin.

Make sure that you are logged in as Admin in NDS mode on the NetWare 4.xx file server.

To configure the NIC using NWAdmin:

1.Select the desired organizational unit that will contain the new printer.

2.Create/Add a new printer object with the name of the printer (NIC).

3.Select the desired container object (organizational unit) that will contain the default print queue.

4.Create a new print queue.

5.Select the print queue and assign the print queue to the printer you created.

6.Exit NWAdmin.

Configuring for NDS Using JetAdmin or XAdmin

Refer to your JetAdmin documentation for specific details on the use of JetAdmin.

NOTE: The same service cannot be used for both queue server mode and remote printer mode. If you wish to enable remote printer capabilities or services other than the default NetWare services, you must define the new services that are enabled for NetWare and for the desired port.

1.Double-click on the icon for JetAdmin or XAdmin. Select the name of the NIC from the list

NOTE: The default name of the NIC is KOD_xxxxxx.

2.From JetAdmin or Xadmin, select the remote printer as the operating mode. Select the name of your printer/NIC as the print server name, and select the number of the printer you made a note of as the printer number.

3.Select the desired default printer driver.

6-4 Part No. 6B4389 June 1999