Novell NetWare
XConfig
1.Log in as Supervisor (Netware 3.xx) or as Admin (NetWare 4.xx). Make sure that you specify the /b option for bindery mode.
2.Insert the diskette that came with the NIC into the disk drive. Enter the following at the DOS prompt:
A:XCONFIG or A:XCONFIG ppsname
Ppsname is the name of the NIC. The default name is
KOD_xxxxxx. The xxxxxx is the last six digits of the Ethernet address.
3.Select the NIC from the list of print servers if you did not specify the print server name in the XConfig command.
4.4. When you get the message that the NIC is connected, enter the password Access in response to the # prompt. Press Enter in response to the Enter Username> prompt.
5.At the Local> prompt, enter:
SET NETWARE SERVER servername ENABLED
NOTE: The servername is the name of the file server on which the print queue will reside. If there is more than one file server from which you wish to print, repeat this command as many times as necessary.
6. Exit XConfig.
Part No. 6B4389 June 1999 |