Kodak 8660, 8670 manual Novell Queue and Printer/NIC Association Using JetAdmin, Novell NetWare

Novell NetWare

Novell Queue and Printer/NIC Association Using JetAdmin

The NIC is compatible with Hewlett-Packard’s JetAdmin tool. JetAdmin may be used to select a particular printer/NIC that is advertising its services on the network. The NIC’s Netware service is KOD_xxxxxx_P1, by default where xxxxxx is the last six digits of the NIC’s Ethernet hardware address. The NIC can then be associated with a particular Novell server and queue.

NOTE: You must be logged into the particular Novell server as an administrator in order to set up NIC parameters associated with that server.

JetAdmin can be used to configure NetWare related parameters on the NIC.

Novell Queue and Printer/NIC Association Using XAdmin or XConfig

Refer to “Using Configuration Utilities” for additional details on using the following configuration utilities for the NIC:

•XAdmin is a graphic configuration utility which is included on the diskette that comes with the NIC. XAdmin allows an administrator to establish and associate the NIC with a NetWare queue using the NetWare submenu options.

NOTE: You must be logged into the particular Novell server as an administrator to set up NIC parameters associated with that server.

•XConfig is a command line oriented NIC configuration utility which is included on the diskette that comes with the NIC. It is similar to invoking a Telnet session without the necessity of first establishing an IP address on the NIC.

NOTE: A new name can be entered for the NIC if desired. Changing the name also changes any other protocols that use the same name.

Part No. 6B4389 June 1999 6-3