Camera
Problem | Cause | Solution |
|
|
|
Picture is too light. | The flash is not | Change to Auto flash. |
| needed. | See page 15. Check |
|
| the flash default |
|
| setting. See page 51. |
|
|
|
| The subject is too | Move so there is at |
| close when the flash | least 1.6 ft (0.5 m) |
| was used. | between the camera |
|
| and the subject. |
|
|
|
| The light sensor is | Hold the camera so |
| covered. | your hands or other |
|
| objects do not cover |
|
| the light sensor. |
|
|
|
| The Exposure | Decrease the Exposure |
| Compensation is set | Compensation. See |
| incorrectly. | page 22. Check the |
|
| Exposure |
|
| Compensation default |
|
| setting. See page 53. |
|
|
|
Stored pictures are damaged. | The camera memory | Make sure the Ready |
| card was removed | light is not blinking |
| when the Ready light | before removing the |
| was blinking. | card. |
|
|
|
Picture is black and white, | The Effects setting is | Change the Effects |
sepia toned, or has too much | set incorrectly. | setting to No Effects. |
contrast. |
| See page 24. Check |
|
| the Effects default |
|
| setting. See page 54. |
|
|
|
76
