About the Camera’s Weatherproof & Rugged Design
This camera is designed to be weatherproof and rugged. Special seals keep out moisture for a sure, carefree performance in any weather. While you cannot use the camera underwater, ideally it can safely be used:
θin the rain
θat
θat a construction site or areas with excessive dirt or dust.
Important Camera Information
This camera is designed to be weatherproof, not waterproof. It is not designed to be submerged in water, or have water poured over it. Please read the following cautions before using it. Failure to follow the proper precautions may result in the warranty being voided.
θThe camera doors and buttons have rubber seals that prevent water, moisture, and dust from entering the camera. If the battery, memory card door, and lens cover are not fastened or closed correctly, damage to the camera can result. Also, while these doors are open, make sure that no water or dust gets inside the camera or onto the weatherproof seals.
θTo ensure a proper seal, use a clean
θDo not press down on or remove any of the rubber seals.
θWhen you find a damaged or deteriorated rubber seal, call the technical support telephone number for your geographic area. Do not attempt to change or fix the seal.
θIf the camera is not used for a period of time, it is normal to expect that the button or switch may not move smoothly. Push the buttons and switches several times to smooth out the motion.
θDo not leave the camera exposed to rain or snow for extended periods of time.
θUse a clean
θWeatherproofing may be affected when the camera is exposed to sudden changes in temperature. Allow the camera time to adjust to the surrounding temperature before using it. This keeps moisture leaks or condensation from occurring.
