Manuals / Kodak / Computer Equipment / Printer

Kodak Printe manual Printing, To print a file using the Windows driver

Models: Printe

1 60

Download 60 pages 46.57 Kb

Page 22

Printing

3

The way you print from your computer depends on the driver or RIP you have installed. Your printer comes with a Windows driver and one RIP:

•Windows driver for general use

•EFPU

•Flexibanner (trial version)

Printing a file

The Windows driver allows you to print from virtually any Windows-based application.

➪To print a file using the Windows driver

1Open the file from within an application.

2Choose File/Print.

3Select your printer.

4Click Features.

5From here, Page Setup and Advanced tabs allow you to adjust printer specific options for your print file. Generally, you should only need to set paper size and orientation options.

6Click OK, then click OK again to send your file to the printer.

Notes about printing

Print only on untreated vinyl. This printer is not intended for printing on coated vinyl or other media.

This printer is not designed for unattended operation. Be sure that the media weight bar is placed on the media as shown in the Quick Start Guide. This keeps the media the correct distance from the IR bulb and helps to assure proper ink curing.

Image 22

Kodak Printe manual Printing, To print a file using the Windows driver

Contents

Text P/N Revision HistoryWarranty Claims FCC Statement U.S.A VDE statementGeneral operating safety Material safety data sheetIndustry Canada For your safety Manual conventions Other reference materialsContents Appendix E Troubleshooting Appendix a Installing additional memoryAppendix C Technical information Appendix D Error messages Appendix B Menu treePrinter setup Obtaining quality results PrintingUse the right inks and media Choose the right media Caring for your ink and cartridgesCaring for your media Choose the correct printing mode Use the right softwarePrinter options Returning to the default settingsPrinting the settings Important notes about image size vs. dpiTo choose the color mode Color modeChoosing quality mode options Media counter To choose print qualityChoosing feed media options To enter a media length valueTo set auto-load delay To reset the media counterAuto-load delay To display the current valueTo turn off Save Media Defining user setupSave media Auto-WipeChoosing a language To save user setupTo use a previously saved user setting To choose a languageChoosing ink options To set LCD contrastTo set ink reduction To set the ink preheat time To set dry EOPPrinter default settings User Settings Default Other OptionsTo print a file using the Windows driver PrintingEnd of Print function Printing modes Printing vector dataPalette select Accessing HP-GL/2 featuresTo access HP-GL/2 features To choose a palette typeRotation ControlTo set control To rotate the image ReprintsTo make multiple prints Nesting Nest time To enable nestingTo define nesting wait time To enable the ink limit Ink limitAcceptable Simm sizes Installing additional memorySimm installation To remove the right coverTo install the new Simm To remove the SIMMsMenu tree Main menu at a glanceMain menu Feed media menuSetup menu at a glance Bold indicates the default Utility menu at a glance Bold indicates the default Setup menu Print ModeHP-GL/2 Menu Ink Option Menu Serial Comm Menu Bold indicates the default Utility menuPrime menu Service Menu Bold indicates the default Technical information Media Roll ParametersTechnical information C-2 Error messages Cartridge errorsMemory Errors Troubleshooting quick list TroubleshootingEIsolating problems Printer health File will not print Printer front view Ink cartridges do not fire properly Firmware Download Procedure Upgrade/Printer Refresh Overall print quality is poor Calibrate cartridges Data Transfer No output when printing from Unix Application Software Difficulty generating prints ranging from a to D size Calling for Help Customer Technical Support