Kodak Printe manual Nest time, To enable nesting, To define nesting wait time

VinylJet 36TM Reference Guide

The following parameters will not affect nesting:

•Ink limiting;

•Replots;

•If Auto Rotation is enabled, then the nesting algorithm is free to rotate the plot if it determines that doing so will save media. Plots are sequen- tially fitted across the page from right to left; and

•The HP-GL/2 EC command can be used to control cutting. If any plot in a nest has the cutter enabled, the plotter will cut after the nest.

➪To enable nesting

1From themainmenu, chooseSetup Menu/HP-GL/2 Options/Nest Enable.

2Press Select.

3Use the up or down arrow button to display Nest On or Off.

4Press Select.

Nest time

Nest time is the amount of time the printer waits for the next plot to fill the current nest.

The printer will begin printing whenever the printer has been idle for the speci- fied time interval. The time is reset whenever a print job is received.

➪To define nesting wait time

1From the main menu, choose Setup Menu/HP-GL/2 Options/Nest Time.

2Press Select.

3Use the up or down arrow button to display the desired nest time.

4Press Select.

4-6 HP-GL/2