Konica Minolta BIZHUP C351 manual Stapling, Hole Punching

Setting Up the PCL Driver

5

Stapling

Multiple-page documents can be stapled.

The staple function is available only when the optional finisher is installed.

1

2

Click the Setup tab.

Select the “Staple” check box.

3 From the drop-down list, specify the number of staples and the sta- pling position.

Note

Depending on the selected Binding Position setting, different stapling po- sitions are available.

Number of pages that can be stapled when FS-507 is installed: Up to 50 pages on 8-1/2 × 11 w or smaller plain paper, and up to 25 pages on 8- 1/2 × 14 or larger paper. Number of pages that can be stapled when FS- 603 is installed: Up to 50 pages on 8-1/2 × 11 w or smaller plain paper, and up to 25 pages on 8-1/2 × 14 or larger paper.

Hole Punching

Holes can be punched into the printed document.

The hole punch function is available only when optional finisher FS-507 or FS-603 is installed. When using optional finisher FS-603, the punch kit must be installed.

1

2

3

Click the Setup tab.

Select the “Hole-Punch” check box.

From the drop-down list, specify the number of punched holes.

C351 5-11