Konica Minolta BIZHUP C351 manual Local I/F Timeout, C351 10-24

Various Settings

10

Local I/F Timeout

You can set the time until a communication timeout occurs for the parallel, USB, or network interface. (Default setting: 60 seconds)

1 On the Administrator Setting screen, touch [7 Printer Setting].

–For details on displaying the Administrator Setting screen, refer to “To display the Administrator Setting screen” on page 10-21.

2 On the Printer Setting screen, touch [1 Local I/F Timeout].

The Local I/F Timeout screen appears.

3

4

5

Touch [Edit] below the setting that you are specifying.

Press the [C] (clear) key to erase the value, and then use the keypad to type in the default length of time (between 10 and 300 seconds).

–If a value outside of the allowable range is specified, the message “Input Error” appears. Type in a value within the allowable range.

Touch [OK].

The time until a communication timeout occurs is set. To cancel changes to the settings, touch [Cancel].

C351 10-24