Konica Minolta BIZHUP C351 manual For NetWare 4.x/5.x/6 Print Server Mode NDS

Log on to NetWare as an administrator from a client computer. Start up NWadmin.

Setting Up Network Printing

3

NetWare Print: Select “Enable”.

Frame Type: Select “Auto”. (Select the frame type according to the net- work environment.)

Mode: Select “Nprinter/Rprinter”.

Print Server Name: Specify the print server name created in step 4.

Print Server Password: Specify only when setting from the NetWare server.

Print Queue Scan Rate: Specify “1”. (Change if necessary.)

Bindery/NDS: Select “NDS”.

Preferred NDS Context Name: Specify the name of the context that connects to Pserver.

Preferred NDS Tree Name: Specify the name of the tree that Pserver logs on to.

Printer Number: Specify “255”. (Set the number assigned to the printer (0 to 254) or 255.)

7 Restart this machine (turn the main power off, then on again).

–When turning the main power switch OFF then ON, wait for 10 sec- onds or longer before turning it ON again; otherwise the copier may not function normally.

8 Use the NetWare server console to load PSERVER.NLM.

9 Use the NetWare server console to display the print server screen, and then check that “C351” (created printer) is shown as “Waiting for Job” for the connected printer (0).

For NetWare 4.x/5.x/6 Print Server Mode (NDS)

To use the Print Server mode, the IPX protocol must be loaded on the Net- Ware server.

1

2

3 Select either the organization or organizational unit container that of- fers the print service, and then click “Print Services Quick Setup (non- NDPS)” on the “Tools” menu.

4 Enter the appropriate names in the “Printer Server Name”, “Printer Name”, “Print Queue Name”, and “Print Queue Volume” fields, select “Other/Unknown” from the “Printer Type” field, and then click the [Cre- ate] button.

C351 3-20