Setting Up the PPD Driver (Mac OS 9.2)
8
Printer Specific Options (Finishing Options 1 to 4)
You can specify
1
2
3
From the “File” menu, select “Print”.
Select “Finishing Options 1 to 4”.
Specify settings for the following:
Offset: Specifies offset.
Output Tray: Selects the output tray.
Binding Position: Specifies the binding position.
Duplex: Performs duplex printing.
Combination: Specifies booklet printing.
Staple: Performs stapling.
Punch: Performs hole punching.
Fold: Performs folding.
Front Cover: Attaches a front cover page.
Front Cover Tray: Selects the input tray for the front cover.
Back Cover: Attaches a back cover page.
Back Cover Tray: Selects the input tray for the back cover.
Transparency Interleaving: Inserts interleaves between overhead pro- jector transparencies.
Transparency Interleaving Tray: Selects the input tray for the transpar- ency interleaves.
Temporary Stop: Stops printing temporarily after part of the document has been printed so that the proof print can be checked.
Resolution: Specifies the resolution.
Color Selection: Specifies whether to print in color or grayscale.
Glossy Mode: Prints using a gloss finish.
Original ImageType: Prints with a quality suitable for the original docu- ment.
Color Matching (Text): Adjusts the color quality of the text in a docu- ment.
Grayscale (Text): Specifies whether to enable grayscale of the text in a document.
Screening (Text): Specifies screening of the text in a document.
Color Matching (Photo): Adjusts the color quality of photos in a docu- ment.
Grayscale (Photo): Specifies whether to enable grayscale of photos in
a document.Screening (Photo): Specifies screening of photos in a doc- ument.
Smoothing (Photo): Specifies smoothing of photos in a document.
Color Matching (Charts and Graphs): Adjusts the color quality of a chart and graph in a document to the text or photo settings.
C351 |
