Connect the camera to the printer using the camera’s USB cable. The larger plug on the cable is connected to the printer. Slide open the USB- port cover and insert the smaller plug of the cable into the camera. Turn the camera on. The PictBridge screen will be displayed. For other printing options, see the menu navigation section.
Number of prints in the print run.
Number of copies of the displayed image.
|
| Move the controller left and right to |
|
| display the image to be printed. |
|
| Move the controller up to select the |
|
| number of copies to be printed. A |
|
| maximum of twenty copies can be |
|
| selected. To deselect an image for |
|
| printing, move the controller down until |
|
| the number of copies reaches zero. |
:move :sel. | Repeat the previous steps until all the | |
|
| images to be printed are selected. Press |
|
| the controller to continue. If the number |
|
| of images exceeds 50, “Limit:50 images. Reselect images to |
|
| print.” message appears. Reduce the number of images. |
|
|
| The number of prints in the print run are displayed as well | |
No. of prints | : 7 | |||
as the print parameters selected with the menu. See the | ||||
Paper size | :Printer setup | |||
menu navigation section in the page 100 for more | ||||
Layout | :Printer setup | |||
information. Press the controller to begin printing, or press | ||||
Print quality | :Printer setup | the menu button to return to the PictBridge screen. | ||
Data print | :Printer setup |
| ||
:start |
|
| ||
|
|
|
| |
Printing finished.
OK
Once printing begins, the operation can be canceled by pressing the controller. The printing finished message indicates the end of the operation; turn the camera off to end the routine.
99 
