Running the SV-1 Editor | Launching the SV-1 Editor – 11
English
Running the SV-1 Editor

LAUNCHING THE SV-1 EDITOR

Before you can launch the SV-1 Editor, please connect the SV-1 to your com-
puter with a standard USB cable (you can do it with the SV-1 and computer
turned on or off). When done, turn both the SV-1 and your computer on. Then,
locate the application’s icon into your hard drive, and double click it.
When you launch the SV-1 Editor, the content of the SV-1’s memory is trans-
ferred to the Editor. Please wait a few seconds for the transfer to complete.
NOTE: If the computer enters the sleep mode, connection with the SV-1 Editor may
be interrupted. In this case, please exit and relaunch the SV-1 Editor. We suggest
you set your computer to avoid sleeping when working with the SV-1.
SV1-100-EditorGuide-EFGI.book Page 11 Wednesday, June 3, 2009 12:35 PM