44 – The effects in detail | Modulation Effects section
CHORUS 2
This stereo chorus + pitch modulator & flanger was originally intended for use
with guitars, but many keyboard-players have discovered it, especially to give an
extra “touch” on electric pianos.
PHASER 1
This device has been a favourite into many recordings. This is useful to add spar-
kle, animate chord passages, and widen and fatten the sound.
Parameters Values Notes
Speed 0.10…10.00 [Hz] Adjusts the modulation speed.
Intensity 0…99 Adjusts the modulation depth.
Type Chorus, Pitch Mod,
Flanger
Chooses the type of effect.
Width 0…100 Adjusts the left/right spaciousness. It does not work
when in mono mode.
Mode Mono, Stereo Selects the output mode.
Parameters Values Notes
Speed 0.10…10.00 [Hz] Adjusts the modulation speed.
Depth 0…100 Adjusts the modulation depth.
Manual 0…99 Adjusts the center frequency of the sweep. If DEPTH
is set to 100, MANUAL will not function.
Resonance 0…100 Adjusts the phaser’s resonance, changing the height
and sharpness of the phaser’s frequency response
peaks.
SV1-100-EditorGuide-EFGI.book Page 44 Wednesday, June 3, 2009 12:35 PM