The effects in detail | Pre-FX section – 31
English
ORGAN VIBRATO/CHORUS
This effect simulates the chorus and vibrato circuitry of a vintage organ. When
the Preset mode is selected, the knobs have no effect, and you can use the TYPE
knob to select the type of vibrato or chorus. When the Custom mode is selected,
you can use the DEPTH and SPEED knobs to create either of these sounds, for
an even broader range of possibilities than the original unit! The MIX knob
allows you to create vibrato (pitch modulation) by outputting just the effect
sound.
Parameters Values Notes
Speed 1.00…10.00 [Hz] Adjusts the speed of the U-Vibe effect.
Depth 0…100 Adjusts the depth of the U-Vibe effect.
Mix 0…100 Adjusts the mixture of direct sound and vibrato. ‘0’ is
no effect, ‘50’ is chorus, and ‘100’ is vibrato.
Parameters Values Notes
Mode Preset, Custom Selects either preset or custom settings.
Type V1, C1, V2, C2, V3,
C3
Selects the effect type when in Preset mode. V1/V2/V3
are variations of vibrato, and C1/C2/C3 are variations
of chorus.
Vib/Ch Mix 0…100 When in Custom mode, sets the mix level between
Vibrato and Chorus.
Depth 0…100 Adjusts the modulation depth.
Speed 0.02...20.00 [Hz] Adjusts the modulation speed.
Mix 0…100 Adjusts the output level of the effect.
SV1-100-EditorGuide-EFGI.book Page 31 Wednesday, June 3, 2009 12:35 PM