The effects in detail | Reverb/Delay Effects section – 47
English
REVERB/DELAY EFFECTS SECTIONHere you can adjust the settings of a reverb, echo or delay effect inserted after the
cabinet and modulation.
CHOOSING A REVERB/DELAY EFFECT
Click the box of the REVERB/DELAY section, then on the name of the selected
Reverb/Delay effect, and finally choose a different item from the list.
ROOM REVERB
This models the reverberation of a typical room, with numerous early reflec-
tions.
Parameters Values Notes
Time 0…99 Sets the reverb time, which will differ depending on
the reverb type.
Lo Damp 0…100 Adjusts the attenuation of the low-frequency range.
Hi Damp 0…100 Adjusts the attenuation of the high-frequency range.
Pre Delay 0…70 Sets the initial delay before the reverberation begins.
By adjusting this setting you can clarify the definition
of the original sound.
Mix 0…100 Adjusts the mix amount of the reverb.
12
SV1-100-EditorGuide-EFGI.book Page 47 Wednesday, June 3, 2009 12:35 PM