50 – The effects in detail | Reverb/Delay Effects section
STEREO DELAY
This is KORG’s 24-bit digital delay, the DL8000R. With the exception of the sam-
pling frequency and wave control of the DELAY TIME, the circuit is essentially
identical. Since this is a full-stereo design, it’s particularly effective when using a
stereo output.
Parameters Values Notes
BPM 39.95…300 Sets the delay time in BPM (Beats Per Minute).
L Delay Thirty-sec…Whole Specifies the base note of the left channel delay.
R Delay Thirty-sec…Whole Specifies the base note of the right channel delay.
Feedback 0…100 Adjusts the amount of feedback. This results in an
increase/decrease of the number of repetitions.
Hi Damp 0…100 Adjusts the amount of high-frequency attenuation.
Mix 0…100 Adjusts the mix amount of the delay.
SV1-100-EditorGuide-EFGI.book Page 50 Wednesday, June 3, 2009 12:35 PM