|
| Configuring and Controlling the | |
|
| Table 12: Available Settings for Each Application | |
|
|
|
|
| Application | Available Settings |
|
| Keystone | Location, horizontal keystone, vertical keystone, pincushion/barrel and Reset all |
|
| Anyplace | Location, Diagonal Projection and Reset all |
|
| Rotation | Location, pincushion/barrel, Rotation and Reset all |
|
8.1.7The Setup Screen
Figure 20 and Table 13 define the Setup screen.
Figure 20: Setup Screen
Table 13: Setup Screen Functions
Setting | Function | Selection/Range | Default |
Save | Save a profile | From Profile 1 to Profile 8 |
|
Recall | Recall a profile | From Profile 1 to Profile 8 |
|
Slideshow | Set speed for slide show (see section 8.1.8) | Min, Low, Mid, Long, Max, | Off |
|
| Off |
|
Frame Lock | Locks the vertical refresh rate of the output | On/Off | Off |
| to that of the input1,2 |
|
|
Auto Image | Automatically adjust and align the picture | Manual, Auto | Manual |
| each time one of the UXGA inputs is |
|
|
| selected or if the UXGA input resolution has |
|
|
| changed |
|
|
Switching | Select seamless switching | Seamless, Fast | Seamless |
Mode | Black) or fast switching which is faster but |
|
|
| may cause glitches on the output (applies |
|
|
| only when switching between analog inputs) |
|
|
1 Note that seamless switching is not possible when working in the Frame Lock mode unless all sources are frame synchronized
2 In cases where the output resolution can support the vertical refresh rate of the input, the output refresh rate will change according to the input refresh rate
35
