Kramer Electronics VP-725XLA user manual Infrared Remote Control Transmitter Functions

Configuring and Controlling the VP-725XLA

Table 19: Infrared Remote Control Transmitter

Functions

PIP PIP Size SWAP

Auto-Image OSD Picture Menu

VOL	Enter	VOL
		+
USB		Capture

VGA

HDMI

CV

YC

YPbPr

Figure 27: Infrared Remote

Control Transmitter

Key	Function
Freeze	Pauses the output video
Power	Cycles power
Blank	Toggles between a blank screen (blue or black
	screen) and the display
Mute	Mutes the audio output
MIX	Routes the combined signals from the Mic and the
	Line to the Master output
Talk Over	Routes the selected input to the output until an
	audio signal is detected on the microphone input
	Routes the signal from the microphone to the
Over Ride	Master output instead of from the Line, whose
	signal is blocked
Audio Level	Set the audio level
Video Group	Select the Video group operation mode
Audio Group	Select the Audio Group operation mode
Scaler	Select the Scaler operation mode
Master	Select the Master Audio operation mode
Audio
PIP	Toggles the picture-in-picture function and
	illuminates/turns off the PIP button
PIP Size	Toggles the PIP size
SWAP	Toggles between the PIP content and the parent
	screen content
PIP Source	Selects the PIP source1
Auto Image	Assesses the image and improves the quality
	accordingly, by automatically adjusting the phase,
	frequency and position
OSD	Activates/deactivates access to the OSD Menu
Picture	Open the Picture menu 2
Menu	Opens the Main menu2
Navigation	Allows maneuvering within an OSD screen (left,
arrows	right, up and down, as well as the Enter arrow at
	the center). The VOL+ and VOL- buttons increase
	and decrease the volume level, respectively
USB	select the USB3 source
Capture	Capture an image to place as a logo or
	background
VGA	selects the VGA (UXGA) source (from 1 to 4)
HDMI	selects the HDMI source (from 1 to 4)
CV	selects the CV source (from 1 to 4)
YC	selects the YC source (from 1 to 4)
YPbPr	selects the YPbPr (COMP) source (from 1 to 4)

1 Press the PIP Source key and then an input key

2 Opens the menu on the LCD display and if the OSD button illuminates, will open the relevant OSD 3 JPEG files on a USB memory stick

42 KRAMER: SIMPLE CREATIVE TECHNOLOGY