Kramer Electronics user manual Connecting the VP-747 to the Kramer VP-727T, VP-727A

Connecting the VP-747 Control Ports

7.3 Connecting the VP-747 to the Kramer VP-727T

To connect the VP-747to the Kramer VP-727TPresentation Switcher Control Panel1 via the mini XLR connector, as illustrated in, do the following:

•Connect the “A” PIN on the TO CONTROLLER mini XLR connector of the VP-747to the A (+) PIN on the RS-485 rear panel port of the VP-727Tunit

•Connect the “B” (-) PIN on the TO CONTROLLER mini XLR connector of the VP-747to the B (-) PIN on the RS-485 rear panel port of the VP-727Tunit

•If shielded twisted pair cable is used, the shield may be connected to the “G” (Ground) PIN on one of the units

A

B

VP-727A VP-747

G

VP-747 Mini

XLR Connector

VP-727T Side Panel VP-727T

12V

Power Supply

Figure 8: Connecting the VP-747 to the VP-727T

It is recommended that the PROGRAM and PREVIEW are set with the same

output resolutions for the best results when working with the T-bar

1 See the separate VP-727T user manual on our Web site at http://www.kramerelectronics.com

18 KRAMER: SIMPLE CREATIVE TECHNOLOGY