Kramer Electronics user manual Operating the VP-747, Operating via the OSD Menu Screen

Operating the VP-747

9 Operating the VP-747

You can operate the VP-747via the:

•OSD Menu, see Section 9.1

•LCD Display, see Section 9.2

•Infrared Remote Control Transmitter, see Section 9.3

•ETHERNET/RS-232, see Section 9.4

9.1Operating via the OSD MENU Screen

The OSD superimposes a menu on the Preview screen from which you can control your VP-747. When the OSD front panel button is on, pressing the MENU button on the front panel or the Menu key on the infrared remote control transmitter displays the first OSD screen1, the “Preview Setting” screen. If the OSD is off, pressing the MENU button on the front panel or the Menu key on the infrared remote control transmitter will not display the “Menu screen”. In this case, you can navigate via the front panel LCD. Figure 10 defines the six interactive icons:

Figure 10: Menu Screen Icons

9.1.1Preview and Program Setting Commands

Figure 11 and Table 5 define the Preview and Program Setting commands:

Figure 11: Preview and Program Setting OSD Menus

1 Or the last used OSD screen

25