Kramer Electronics VP-747 user manual Setting Function Selection/Range Default Input Sub-menu

Operating the VP-747

Table 5: Preview and Program Setting OSD Menus

Setting	Function	Selection/Range	Default
Input Sub-menu
Source	Select the input source	Channel 1 to 8	Channel 1
Type	Set the video type	RGBHV, RGBS	RGBHV
		(PC/Video), RGsB
		(PC/Video), YCbCr, Y/C or
		video, HDMI (for input 1
		and input 2 only)
Video Standard	Set the Video standard	Auto, NTSC, PAL,	Auto
		PAL-M, PAL-N, NTSC
		4.43, SECAM or PAL 60
H-Position1	Set the horizontal position2
V-Position1	Set the vertical position
Frequency1	Adjust the frequency3
Phase4	Adjust the phase	0 to 31	0
Auto Image	Assesses the image and improves the quality
	accordingly, by automatically adjusting the
	phase, frequency and position. Upon
	completion, the relevant OSD values are
	updated (H-Position, V-Position, Phase and
	Frequency)
Overscan	Allows stretching of the outputted picture	On or Off	On
Picture Sub-menu
Brightness	Adjust the brightness	-50 to 50	0
Contrast	Adjust the contrast	-50 to 50	0
Color	Adjust the color	-50 to 50	0
Hue	Adjust the hue	-180 to 180	0
Sharpness	Adjust the sharpness	-50 to 50	0
Output Gamma	Adjust the gamma	1 to 4	1
Film Mode	Set the film mode	Auto, Video or Film	Auto
Temporal NR5	Set the temporal noise reduction level	Off, Low, Medium or High	High
Mosquito NR5	Set the Mosquito noise reduction level	Off, Low, Medium, High	Low
Block NR5	Set the block noise reduction level:	Off or On	High
Detail	Set the detail enhancement	Off, Low, Medium or High	Off
Enhancement5
Luma Transition	Set the luminance transition enhance level:	Off, Low or High	Low
Enhance5
Chroma Transition	Set the chrominance transition enhance level:	Off, Low or High	Low
Enhance5

1 The range changes according to the input mode

2 For UXGA and component video inputs

3 For UXGA inputs

4 Only for a VGA Source

5 You do not have to press ENTER after selecting the desired parameter to change it

26 KRAMER: SIMPLE CREATIVE TECHNOLOGY