Kramer Electronics VP-81SIDN user manual Switcher

	#	Feature		Function
8	12	LOCAL AUDIO	DVI	Connect to the local DVI audio source
	13	INPUTS	HDMI	Connect to the local HDMI audio source
	14	HDMI OUT Connector		Connect to the local HDMI acceptor
	15		+L–G+R–	Connect to the balanced audio acceptor (see Section 6.1)
	16	AUDIO	R	Connect to the unbalanced audio acceptor right channel
	17	OUTPUTS	L	Connect to the unbalanced audio acceptor left channel
	18		S/PDIF	Connect to the digital audio acceptor
	19	PROG TERM DIP-Switch		DIP-Switch 1: Sets the RS-485 bus termination (see Section 8.3).
				Up = Off, Down = On (Default = On)
VP				DIP-Switch 2: For the use of Kramer service personnel only
	20	RS-4853-way Terminal Block		Connect to RS-485 port on a remote controller or another VP-81SIDN.
-81SIDN				Connect: G to Ground, A to A, and B to B (see Section 6.4)
	21	RESET Button		Press while power-cycling the device to reset parameters to factory default values
–	22	REMOTE IR 3.5mm Mini Jack		Connect to an external IR receiver unit for controlling the device via an IR remote
				controller (see Section 3.3)
Defining the VP-81SIDN
8x1 Digital Step-In
Switcher