Remote Input Selection Switch Wiring | Kramer Electronics VP-81SIDN

The following example illustrates three switches (1, 8 and A) connected so as to remotely control inputs 1 and 8, and select an output respectively. Connected as shown, pressing switch 1 causes input 1 on the VP-81SIDNto be the active input, and pressing switch 8 causes input 8 to be the active input. Pressing switch A causes the output selection to toggle between the TP and HDMI outputs.

Figure 5: Remote Input Selection Switch Wiring

To connect remote input/output selection switches as illustrated in the example in Figure 5:

1.Connect Switch 1 to pins 1 and G on the terminal block (remote step-in for input 1).

2.Connect Switch 8 to pins 8 and G on the terminal block (remote step-in for input 8).

3.Connect Switch A to pins 11 and G on the terminal block (remote output selection toggle).

VP-81SIDN - Connecting the VP-81SIDN 8x1 Digital Step-In Switcher	13

Image 17

Kramer Electronics VP-81SIDN user manual Remote Input Selection Switch Wiring

Contents

VP-81SIDN Page Figures Remote Input Selection Switch Wiring Introduction Achieving the Best Performance Safety InstructionsGetting Started Recycling Kramer Products Overview Using the IR Transmitter for the VP-81SIDN About the Power Connect FeatureUsing Twisted Pair cables Feature Function Defining the VP-81SIDN 8x1 Digital Step-In Switcher Defines the rear panel of the VP-81SIDN Switcher Installing in a Rack Connecting the VP-81SIDN 8x1 Digital Step-In Switcher Connecting the VP-81SIDN 8x1 Digital Step- In SwitcherPage Terminal Description Number Connecting to a Balanced Audio Acceptor Remote Input Selection Switch Wiring Connecting and Controlling Multiple VP-81SIDN Devices Connecting to the VP-81SIDN via RS-485To connect to the VP-81SIDN via RS-232 To connect a device with a RS-485 port to the VP-81SIDN To connect up to four VP-81SIDN devices Connecting the Ethernet Port Directly to a PC Local Area Connection Properties Window Internet Protocol Version 6 Properties Window Control Configuration via the Ethernet Port Connecting the Ethernet Port via a Network Hub or Switch To select an input Operating the VP-81SIDN LocallySelecting an Input Resetting all Input Priorities to the Default Muting the Input when using Step-In CommandersSetting the Audio Output Volume Selecting an Output Muting and unmuting the Audio Locking and Unlocking the Front Panel ButtonsTo lock and unlock the front panel buttons To mute and unmute the audio output Setting the RS-485 Device Number Configuring and Maintaining the VP-81SIDNReading the Current RS-485 Device Number To read the current RS-485 machine number Resetting to the Factory Default Settings Setting the RS-485 Bus Termination Upgrading the Firmware Operating the VP-81SIDN Remotely Operating the VP-81SIDN Using the Controller Software Following table describes the main window features Feature Description Output Volume Slider Menu Bar Sub Menu Description Options Authorized UsersStep-In Software Menu Bar To log in as admin Logging in as AdminConnecting to the Device To switch an input to an output Switching an Input to an Output Input Selection Switching and Selecting an Input when using the VP-81SIDN To change the output volume Changing the Output VolumeMuting the Audio Output To mute the audio output To change an input/output button icon and label Changing the Priority of an InputChanging the Input and Output Button Icons and Labels Updating the Firmware Resetting the Device To set the number of devices Setting the IP Network ParametersSetting Multiple Cascaded Devices VP-81SIDN Operating the VP-81SIDN Remotely Do not use a crossed TP cable with this product Wiring the DGKat TP RJ-45 ConnectorsWire Color Inputs Technical Specifications Ethernet Default Communication ParametersRS-232 Kramer Protocol 3000 Syntax ProtocolHost Message Format Device Message Format Command Terms Entering Commands Kramer Protocol 3000 CommandsCommand Forms Chaining Commands Ldfw Page Safety Warning