Kramer Electronics VP-81SIDN instruction

Figure 7: Local Area Connection Properties Window

4.Highlight either Internet Protocol Version 6 (TCP/IPv6) or Internet Protocol Version 4 (TCP/IPv4) depending on the requirements of your IT system.

5.Click Properties.

The Internet Protocol Properties window relevant to your IT system appears as shown in Figure 8 or Figure 9.

VP-81SIDN - Connecting the VP-81SIDN 8x1 Digital Step-In Switcher	17

Image 21

Kramer Electronics VP-81SIDN user manual Local Area Connection Properties Window

Contents

VP-81SIDN Page Figures Remote Input Selection Switch Wiring Introduction Safety Instructions Getting StartedAchieving the Best Performance Recycling Kramer Products Overview About the Power Connect Feature Using Twisted Pair cablesUsing the IR Transmitter for the VP-81SIDN Feature Function Defining the VP-81SIDN 8x1 Digital Step-In Switcher Defines the rear panel of the VP-81SIDN Switcher Installing in a Rack Connecting the VP-81SIDN 8x1 Digital Step-In Switcher Connecting the VP-81SIDN 8x1 Digital Step- In SwitcherPage Terminal Description Number Connecting to a Balanced Audio Acceptor Remote Input Selection Switch Wiring Connecting and Controlling Multiple VP-81SIDN Devices Connecting to the VP-81SIDN via RS-485To connect to the VP-81SIDN via RS-232 To connect a device with a RS-485 port to the VP-81SIDN To connect up to four VP-81SIDN devices Connecting the Ethernet Port Directly to a PC Local Area Connection Properties Window Internet Protocol Version 6 Properties Window Control Configuration via the Ethernet Port Connecting the Ethernet Port via a Network Hub or Switch Operating the VP-81SIDN Locally Selecting an InputTo select an input Resetting all Input Priorities to the Default Muting the Input when using Step-In CommandersSetting the Audio Output Volume Selecting an Output Muting and unmuting the Audio Locking and Unlocking the Front Panel ButtonsTo lock and unlock the front panel buttons To mute and unmute the audio output Setting the RS-485 Device Number Configuring and Maintaining the VP-81SIDNReading the Current RS-485 Device Number To read the current RS-485 machine number Resetting to the Factory Default Settings Setting the RS-485 Bus Termination Upgrading the Firmware Operating the VP-81SIDN Remotely Operating the VP-81SIDN Using the Controller Software Following table describes the main window features Feature Description Output Volume Slider Authorized Users Step-In Software Menu BarMenu Bar Sub Menu Description Options Logging in as Admin Connecting to the DeviceTo log in as admin To switch an input to an output Switching an Input to an Output Input Selection Switching and Selecting an Input when using the VP-81SIDN To change the output volume Changing the Output VolumeMuting the Audio Output To mute the audio output Changing the Priority of an Input Changing the Input and Output Button Icons and LabelsTo change an input/output button icon and label Updating the Firmware Resetting the Device Setting the IP Network Parameters Setting Multiple Cascaded DevicesTo set the number of devices VP-81SIDN Operating the VP-81SIDN Remotely Wiring the DGKat TP RJ-45 Connectors Wire ColorDo not use a crossed TP cable with this product Inputs Technical Specifications Default Communication Parameters RS-232Ethernet Kramer Protocol 3000 Syntax ProtocolHost Message Format Device Message Format Command Terms Entering Commands Kramer Protocol 3000 CommandsCommand Forms Chaining Commands Ldfw Page Safety Warning