Installing in a Rack | Kramer Electronics VP-81SIDN specs

5 Installing in a Rack

This section provides instructions for rack mounting the unit.

VP-81SIDN - Installing in a Rack	9

Image 13

Kramer Electronics VP-81SIDN user manual Installing in a Rack

Contents

VP-81SIDN Page Figures Remote Input Selection Switch Wiring Introduction Getting Started Safety InstructionsAchieving the Best Performance Recycling Kramer Products Overview Using Twisted Pair cables About the Power Connect FeatureUsing the IR Transmitter for the VP-81SIDN Feature Function Defining the VP-81SIDN 8x1 Digital Step-In Switcher Defines the rear panel of the VP-81SIDN Switcher Installing in a Rack Connecting the VP-81SIDN 8x1 Digital Step-In Switcher Connecting the VP-81SIDN 8x1 Digital Step- In SwitcherPage Terminal Description Number Connecting to a Balanced Audio Acceptor Remote Input Selection Switch Wiring Connecting and Controlling Multiple VP-81SIDN Devices Connecting to the VP-81SIDN via RS-485To connect to the VP-81SIDN via RS-232 To connect a device with a RS-485 port to the VP-81SIDN To connect up to four VP-81SIDN devices Connecting the Ethernet Port Directly to a PC Local Area Connection Properties Window Internet Protocol Version 6 Properties Window Control Configuration via the Ethernet Port Connecting the Ethernet Port via a Network Hub or Switch Selecting an Input Operating the VP-81SIDN LocallyTo select an input Resetting all Input Priorities to the Default Muting the Input when using Step-In CommandersSetting the Audio Output Volume Selecting an Output Muting and unmuting the Audio Locking and Unlocking the Front Panel ButtonsTo lock and unlock the front panel buttons To mute and unmute the audio output Setting the RS-485 Device Number Configuring and Maintaining the VP-81SIDNReading the Current RS-485 Device Number To read the current RS-485 machine number Resetting to the Factory Default Settings Setting the RS-485 Bus Termination Upgrading the Firmware Operating the VP-81SIDN Remotely Operating the VP-81SIDN Using the Controller Software Following table describes the main window features Feature Description Output Volume Slider Step-In Software Menu Bar Authorized UsersMenu Bar Sub Menu Description Options Connecting to the Device Logging in as AdminTo log in as admin To switch an input to an output Switching an Input to an Output Input Selection Switching and Selecting an Input when using the VP-81SIDN To change the output volume Changing the Output VolumeMuting the Audio Output To mute the audio output Changing the Input and Output Button Icons and Labels Changing the Priority of an InputTo change an input/output button icon and label Updating the Firmware Resetting the Device Setting Multiple Cascaded Devices Setting the IP Network ParametersTo set the number of devices VP-81SIDN Operating the VP-81SIDN Remotely Wire Color Wiring the DGKat TP RJ-45 ConnectorsDo not use a crossed TP cable with this product Inputs Technical Specifications RS-232 Default Communication ParametersEthernet Kramer Protocol 3000 Syntax ProtocolHost Message Format Device Message Format Command Terms Entering Commands Kramer Protocol 3000 CommandsCommand Forms Chaining Commands Ldfw Page Safety Warning