Kramer Electronics Operating the VP-81SIDN Locally, Selecting an Input, To select an input

7 Operating the VP-81SIDN Locally

This section describes:

∙Selecting an input (see Section 7.1)

∙Muting the input when using Step-In Commanders (see Section 7.2)

∙Resetting all input priorities to their defaults (see Section 7.3)

∙Selecting an output (see Section 7.4)

∙Setting the audio output volume (see Section 7.5)

∙Locking and unlocking the front panel buttons (see Section 7.6)

∙Muting the audio (see Section 7.7)

Powering up the VP-81SIDNrecalls the last settings (that is, the configuration of the device when it was powered down) from the non-volatile memory.

7.1Selecting an Input

The input buttons illuminate to indicate the following:

∙Off indicates the input is not selected

∙On indicates the input is selected

∙Flashing indicates that you have tried to select the input but another input with a higher priority is currently selected

To select an input:

∙Press one of the ten front panel Input Select buttons. The selected button lights

Note: Pressing an active input button mutes the input. Pressing the button again unmutes the input.

Note: The priority of each input can be set individually using the Step-In Commander panel.

20 VP-81SIDN - Operating the VP-81SIDN Locally