Auxiliary Functions Chapter 1
1 1.9 Scanning the Document in Separate Batches (“Separate Scan” Function)
1.9Scanning the Document in Separate Batches (“Separate Scan” Function)
A document can be divided and scanned in a number of batches, then be combined and treated as a single copy job.
The maximum number of document pages that can be loaded into the duplexing document feeder is 100. However, by copying using the “Separate Scan” function, a document exceeding 100 pages can be scanned and treated as a single copy job.
In addition, the loading location of the document can be switched between the orig- inal glass and the duplexing document feeder partly through the copy job.
OriginalCopy
*Document capacity: 100 sheets of plain paper
To set the “Separate Scan” function
1Touch [Auxiliary].
The Auxiliary screen appears.
2Touch [Separate Scan].
❍To cancel the “Separate Scan” function, touch [Separate Scan] again.
3Specify any other necessary settings.
4Position the document(s) to be copied.
❍For more details, refer to “Feeding the Document” of chapter 4 “Original Documents” in the Basic Operations volume.
5Press the [Start] key.
6Repeat steps 4 and 5.
