Lantronix MSS100, 1-T2 manual Pinouts, DB25 Connector, RJ-45 Connector

Pinouts DB25 Connector

C - Pinouts

In the following diagrams, unlabeled pins are not connected.

C.1 DB25 Connector

The Þgure below shows the pin connections of the MSS DB25 connector.

Figure C-1:Pinout of DB25 Serial Port

RX (in)	CTS (in)	Ground
TX (out)	RTS (out) DSR (in)	CD (in)

DTR (out)

C.2 RJ-45 Connector

Lantronix servers are RS-423 compliant, and are thus limited by the equipment at the remote end of the serial line. If the Server is connected to an RS-232 device, it is subject to RS-232 limits.

RS-232 lines are limited to 15m (50 ft.) in length at 9600 baud, and to 2m (6 ft.) at 115.2K baud, although they will generally work at longer lengths.

Figure C-2:Pinout of RJ45 Serial Port

1 2 3 4 5 6 7 8	1	- RTS (out)
	2	- DTR (out)
	3	- TX+ (out)
	4	- TX-
	5 - RX-
	6	- RX+ (in)
	7 - DSR (in)
	8 - CTS (in)

C - 1