Every angle measured in the daily work is corrected automatically if the compensator

 

and the Hz-corrections are activated in the instrument configuration. Select Main

 

Menu: Config...\Instrument Settings...\Compensator to check the settings.

 

 

View current

The currently used adjustment errors can be viewed under Main Menu:

adjustment errors

Tools.../Check & Adjust...\Current Values.

 

 

Mechanical

The following instrument parts can be adjusted mechanically:

adjustment

• Circular level on instrument and tribrach

 

• Visible red laser beam of reflectorless EDM - option

 

• Laser plummet

 

• Optical plummet - option on tribrach

 

• Allen screws on tripod

Precise measurements

To get precise measurements in the daily work, it is important:

To check and adjust the instrument from time to time.

To take high precision measurements during the check and adjust procedures.

To measure targets in two faces. Some of the instrument errors are eliminated by averaging the angles from both faces.

Refer to "5.2 Preparation" to find more important points.

Check & Adjust

TPS1200

91

Page 91
Image 91
Leica TPS1200 user manual View current, Adjustment