Check & Adjust

TPS1200

110

Inspecting the direction of the beam step-by-step

TPS12_36

The following table explains the most common settings.

Step Description

1.Set up the provided target plate between 5 m and 20 m with the grey reflective side facing the instrument.

2.Move the telescope to face II.

3.Switch on the red laser beam by activating the laser pointer function. SHIFT F11 to access CONFIGURE Lights, Display, Beeps, Text and then select the Lights page.

Page 110
Image 110
Leica user manual Check & Adjust TPS1200 110