Leica TPS1200 user manual Check & Adjust, Adjusting Direction Beam step-by-step

Check & Adjust	TPS1200	112
Adjusting the
direction of the
beam step-by-step
	a
	a)	Rear
		adjustment port
	b)	Front
	b	adjustment port
	TPS12_037

The following table explains the most common settings.

Step Description

1.Pull the two plugs softly out from the adjustment ports on top side of the

telescope housing in face II.

) Make sure not to break the strings of the two plugs.

To correct the height of the beam, insert the screwdriver supplied into the2.

rear adjustment port and turn it clockwise to move the dot on the target plate obliquely upwards or anticlockwise to move it downwards.

3.	To correct the beam laterally, insert the screwdriver into the front adjust-
	ment port and turn it clockwise to move the dot on the target plate to the
	right or anticlockwise to move it to the left.