Voice-Activated Mobile Phone Dialing (Jabra PRO 9470 Only)

This feature requires that your mobile phone supports the hands-free Bluetooth profile. See your mobile phone’s documentation for details about how to set up voice-activated dialing and whether this feature is supported over Bluetooth.

Figure 23: To use voice-activated dialing, tap the multifunction button and speak the appropriate voice tag

To use voice-activated dialing with a mobile phone that supports it:

1.If necessary, set the mobile phone as the current target for your headset (see also Section 6.2: The Target Phone Concept).

2.Tap the headset’s multifunction button or touch the open-connection icon on the touchscreen. You will then hear the voice-dialing prompt generated by your mobile phone. Speak the trigger for the number you want and allow the phone to dial.

Tip: Your voice tags may work better if you record them using the headset rather than your phone’s built-in microphone. This will make sure that the sound the phone “hears” coming from the headset when dialing will be the closest possible match to the recorded voice tag.

6.4How to answer a call

Figure 24: Answering a call

To answer a call from any connected phone:

1.You will hear a ring tone from the target phone, Jabra PRO base and/or headset. Usually, the touchscreen indicates which phone is ringing and (if possible) shows the incoming phone number. The ringtone played in the headset normally also indicates which phone is ringing (see also Section 7.3: Headset Controls and Signals). Do one of the following:

english

Jabra PRO 9460, 9460-Duo and 9470 User manual

28

Page 28
Image 28
Lennox Hearth user manual How to answer a call, Voice-Activated Mobile Phone Dialing Jabra PRO 9470 Only