Lennox Hearth 9470 7.2Attaching or detaching a Wearing Style, english, Attaching the headband

Models: 9470

1 67
Download 67 pages 8.72 Kb
Page 33
Image 33
7.2Attaching or detaching a Wearing Style

7.2Attaching or detaching a Wearing Style

Note: Jabra PRO 9460-Duo headset is always worn as a headband.

Attaching the headband

1.Align the mounting surface of the headset with matching socket on the headband attachment.

2.Press the headset assembly firmly onto the outer side of the headband attachment until it clicks into place (snap-to-click). If you have trouble pressing them together, try to rotate the boom arm about 300 and try again. Refer to the figure in the section 4.3: Assemble the Headset” earlier in this manual.

3.Rotate the headset boom arm for left- or right-ear use as needed. Always position the microphone so that it sits as close to the corner of your mouth as possible when you wear the headset.

4.Adjust the length of the headband to fit snugly around your head. See also Section 7.1: How to Wear the Headset for illustrations.

Detaching the headband

1.Hold the assembly firmly in both hands, with the headset in one hand and the ear-cushion assembly of the wearing-style attachment in the other.

2.Gently pull the headset away from the headband attachment until it comes free. If you have trouble pulling them apart, try to rotate the boom arm about 300 and try again.

Figure 28: Detaching a wearing-style attachment from the headset

Attaching the ear hook

Note: The ear hook is delivered pre-assembled for wearing on your right ear with the medium sized earbud mounted.

1.Decide whether you want to wear the ear hook on the left or right ear — you might need to pull out the hook itself from its attachment, rotate it 180 degrees and then push it back in to change left/right orientation. Left and right assemblies are shown on the previous page in the figure “Assembling and wearing the Jabra PRO headset in various styles”:

The point at which the hook is attached — marked with the text “Jabra” — must always be in front of the hook itself.

2.Try placing the ear hook with an earbud mounted in your ear. If it does not fit snugly in your ear, pull the earbud off the attachment and put on another size (small, medium and large earbuds are delivered as standard.)

english

Jabra PRO 9460, 9460-Duo and 9470 User manual

33

Page 33
Image 33
Lennox Hearth 9470 7.2Attaching or detaching a Wearing Style, english, Attaching the headband, Detaching the headband