4. System Setup and Connections
This chapter explains how to assemble your Jabra PRO solution and connect it to your other office equipment.
4.1Setup Overview and Background
Connection Diagram (for no headset port)
english
Figure 7: Jabra PRO base connections (Bluetooth available with Jabra PRO 9470 only)
Using a Headset with a Desk Phone
To accommodate the full range of desk phones in use, Jabra PRO is able to adapt itself to your phone by offering the following settings:
-Termination standard
Though all desk phones use the same type of cable to connect the handset to the phone body, the internal wiring standard for this cable varies according to
-Microphone level
The sound volume sent from your Jabra PRO base must be adjusted to ensure that it is neither too quiet nor too loud for your
-Electronic-hookswitch or handset lifter
An electronic hookswitch adapter or handset lifter will enable you to answer the phone or hang up using only the button on your headset or its docking operations. These are available as optional accessories for Jabra PRO; the best choice for you will depend on your
The Jabra PRO setup wizard will help you to make each of the above settings.
Using a Headset with a Softphone
To use Jabra PRO with a softphone, you must connect the Jabra PRO base to your PC via a USB cable and install the Jabra PC Suite collection of software and softphone drivers on your PC. The Jabra PRO setup wizard will remind you to do this.
Using a Jabra PRO 9470 Headset with a Mobile Phone
Jabra PRO 9470 Base can connect to a mobile phone using Bluetooth (the headset itself does not use Bluetooth). To enable Bluetooth communication, you must pair the two units. The Jabra PRO setup wizard will help you to do this.
Jabra PRO 9460,
14
