Lenovo 3093AC6 manual When installing, Cable routing

Table 22. Removal steps of base cover assembly for ThinkPad X200, X201, and X201i (continued)

In step 5 and 6 , remove the system board, the DC-in connector, and the fan assembly together from the base cover assembly.

When installing:

Check the position of the wireless switch , and firmly fit the system board into the base cover assembly.

Note: Following step is only for ThinkPad X201 and X201i.

Cable routing:

Route the speaker cable as shown in this figure.

Chapter 8. Removing and replacing a FRU 97