1040 Palm rest or palm rest with fingerprint reader
For access, remove this FRU in order:
v“1010 Battery pack” on page 84
Note:
In models with the fingerprint reader, the sensor is attached to the palm rest FRU. If the fingerprint reader has any defects, you can replace it by the procedures given in this section, which are the same for a palm rest with or without a fingerprint reader.
Table 12. Removal steps of palm rest
1
1
1
Step | Icon | Screw (quantity) | Color | Torque |
|
|
|
|
|
|
| M2 ⋅ 14 mm, | Black | 0.189 Nm |
|
|
| (1.85 kgfcm) | |
|
|
|
|
|
2 |