1010 Battery pack
Important notice for replacing a battery pack:
ThinkVantage Toolbox (in Windows 7) and Lenovo System Toolbox (in Windows Vista and Windows XP) have an automatic battery diagnostic that determines if the battery pack is defective. A battery pack FRU should not be replaced unless this diagnostic shows that the battery is defective.
The only exception to this is if the battery pack is physically damaged or a customer is reporting a possible safety issue.
If ThinkVantage Toolbox or Lenovo System Toolbox is not installed in the computer, the customer should download this program before a
DANGER
Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode.
Table 9. Removal steps of battery pack |
|
|
|
|
| |
Unlock the battery release lever | . Holding the battery release lever in the | |||||
unlocked position | , remove the battery pack in the direction shown by arrow | |||||
. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12
3
When installing: Install the battery pack along the slide rails of the slot. Then make sure that the battery release lever is in the locked position.
