7.BP: enable or disable Back Pressure function (Backpressure for half duplex mode).

8.Bandwidth In/ Out: per port packet transmission rate control. Per level is 100Kbps. It supports individual control method of TX and RX.

9.Priority: set port to high or low priority.

10.Security: enable or disable port security function.

11.Select the <Save>.

Port Configuration interface

Trunk Configuration

You can configure port trunk group.

1.Select <Edit>

2.Using “Tab” key move to the port that want to be added as trunk group.

3.Using “Space” key to mark the port.

4.Using Tab key move to TRK# (ex. TRK1, TRK2…) to change the TRK# value to Static.

5.Save the configuration by selecting <Save>.

25

Page 31
Image 31
LevelOne GSW-2491TXM user manual Trunk Configuration