Device Information, IP Configuration | LevelOne GSW-2491TXM specs

Device Information

You can configure the device information.

1.Select <Edit> action to configure.

2.Name: assign the name for the switch.

3.Description: a short description for the switch.

4.Location: the switch location, ex: Taipei.

5.Contact: the contact person or information.

6.Select <Save> action to save the configuration.

Device Information interface

IP Configuration

You can configure the IP for this switch. The system has the default IP address. You can re-configure or use the default value.

1.Select the <Edit>

2.DHCP: disable or enable the DHCP client function.

3.IP Address: assign the switch IP address. The default IP is 192.168.16.1.

4.Subnet Mask: assign the switch IP subnet mask.

5.Gateway: assign the switch gateway. The default value is 192.168.16.254.

6.Select <Save> action to save the configuration.

Note: Always restart the switch after finished the setup.

22

Image 28

LevelOne GSW-2491TXM user manual Device Information, IP Configuration

Contents

GSW-2491TXM Page Contents STP Snmp Lacp IGMP/GVRP 101 Page Introduction Features Software FeaturesSoftware Upgrade Management Class of Service Port TrunkSpanning Tree QOS Policy Package Contents Ethernet Switching Technology Physical Dimension Front Panel LED Indicators Rear Panel Desktop Installation Attaching Rubber Feet Rack-mounted Installation Attach mounting brackets with screws Power On Mount the switch in an EIA standard 19-inch Rack Network Application Small Workgroup Segment Bridge Small Workgroup Application Stacking Workgroup Connecting to the Switch Stackable switch Master Login in the Console Interface Console Management Console Menu Line Main MenuMain Menu Control Key description Status and Counters Port Status Port Counters System Information Switch Static Configuration Administration Configuration IP Configuration Device Information User Name Configuration Port Configuration Password Configuration Trunk Configuration Port Mirroring Configuration Port Mirroring interface Vlan Configure Vlan Configuration— Vlan ID Port VID 1~255 Type the Pvid Create Vlan Group „ Create Port-Based Vlan „ Create 802.1Q Vlan Edit / Delete Vlan Group Group Sorted Mode Priority Configuration MAC Address Configuration Static MAC Address „ Add the Static MAC Address „ Edit static MAC address Filtering MAC Address „ Delete static MAC address„ Add the Filtering MAC Address „ Edit Filtering MAC address Misc Configuration„ Delete Filtering MAC address „ IFG compensation Disable or Enable Misc Configuration interface Protocol Related Configuration STP System Configuration STP SetupForward Delay Time forward delay time Per Port Setting Snmp Snmp System Options Community Strings „ Add Community Strings „ Edit Community Name „ Delete Community Name Trap Managers „ Add the trap manager Lacp „ Delete Trap Manager Select Delete Working Ports Setting Lacp State Activity IGMP/GVRP Group Status 802.1x Setup 802.1x 802.1x Setup interface Per Port Configuration Misc Configuration System Reset Configuration Factory Default Tftp Configuration System RebootUpdate Firmware Tftp Restore Configuration Tftp Backup Configuration Modem Upgrade Page About Web-based Management Preparing for Web Management System Login Online Help Port status Port Statistics View the Port Information Administrator Administrator function, it provides the following functions Switch Setting IP Address Advanced Setting Basic Switch Settings„ MAC Address Table Entry Default is 300 seconds Miscellaneous Setting „ Igmp Theory of Operation Page Console Port Information Port Controls Trunking Aggregator setting Aggregator Information Aggregator Information State Activity Trunking State Activity interface Forwarding and Filtering Igmp Snooping Static MAC Address MAC filtering Vlan configuration Port-based Vlan Vlan PortBase interface 802.1Q Vlan „ Basic Acceptable Frame type Spanning Tree Per Port Configuration System Configuration„ Forward Delay Time forward delay time Port Mirroring Prot Mirroring interface Snmp Management „ System Options „ Community strings Security Manager„ Trap Manager 802.1X 802.1x Configuration Per Port Configuration Tftp Update Firmware Configuration Backup Tftp Restore Configuration Factory Default Tftp Backup ConfigurationBackup File Name fill the file name „ Default IP address „ Default Gateway „ Subnet mask Panel List System RebootIP Stacking IP Stacking interface IP Stacking master switch configure finished interface IP Stacking Finished configuring interface „ Faulty or loose cables Incorrect connections„ Non-standard cables „ Improper Network Topologies Diagnosing LED Indicators „ Cabling Switch architecture LED IndicatorsConnector Standard Dimensions Power SupplySafety MAC address