IP Stacking interface | LevelOne GSW-2491TXM guide

When all slave switches are removed, and then you can remove the master switch from stacking group. If you remove the master switch before slave switch, go to slave switches one by one and use console configuration to re-configure the switch configuration or you re-configure one of the slave switched as the master by console interface.

1.Click “IP Stacking” in the menu bar.

2.Group ID (0...65535): Assign a group ID for stacking group. The switches in the same stacking group have same group ID.

3.Stacking Mode: select the stacking mode from drag down list.

Disable: it means the switch doesn’t belong to any stacking group or stacking function is disable.

Master: it means the switch is the leader (master) in the stacking group. The master switch can control all the slave switches in stacking group.

Slave: it means the switch is a slave switch of the stacking group. To configure the slave switch that you must access by the master switch.

IP Stacking interface

4.Click Apply button to apply the configuration. When the master switch has configured, you will see the following screen.

98

Image 104

LevelOne GSW-2491TXM user manual IP Stacking interface

Contents

GSW-2491TXM Page Contents STP Snmp Lacp IGMP/GVRP 101 Page Introduction Features Software FeaturesSoftware Upgrade Management Class of Service Port TrunkSpanning Tree QOS Policy Package Contents Ethernet Switching Technology Physical Dimension Front Panel LED Indicators Rear Panel Desktop Installation Attaching Rubber Feet Rack-mounted Installation Attach mounting brackets with screws Power On Mount the switch in an EIA standard 19-inch Rack Network Application Small Workgroup Segment Bridge Small Workgroup Application Stacking Workgroup Connecting to the Switch Stackable switch Master Login in the Console Interface Console Management Main Menu Main MenuConsole Menu Line Control Key description Status and Counters Port Status Port Counters System Information Switch Static Configuration Administration Configuration IP Configuration Device Information User Name Configuration Port Configuration Password Configuration Trunk Configuration Port Mirroring Configuration Port Mirroring interface — Vlan ID Port VID 1~255 Type the Pvid Vlan ConfigurationVlan Configure Create Vlan Group „ Create Port-Based Vlan „ Create 802.1Q Vlan Edit / Delete Vlan Group Group Sorted Mode Priority Configuration MAC Address Configuration Static MAC Address „ Add the Static MAC Address „ Edit static MAC address „ Add the Filtering MAC Address „ Delete static MAC addressFiltering MAC Address „ Delete Filtering MAC address Misc Configuration„ Edit Filtering MAC address „ IFG compensation Disable or Enable Misc Configuration interface Protocol Related Configuration STP Forward Delay Time forward delay time STP SetupSystem Configuration Per Port Setting Snmp Snmp System Options Community Strings „ Add Community Strings „ Edit Community Name „ Delete Community Name Trap Managers „ Add the trap manager Lacp „ Delete Trap Manager Select Delete Working Ports Setting Lacp State Activity IGMP/GVRP Group Status 802.1x Setup 802.1x 802.1x Setup interface Per Port Configuration Misc Configuration System Reset Configuration Factory Default Update Firmware System RebootTftp Configuration Tftp Restore Configuration Tftp Backup Configuration Modem Upgrade Page About Web-based Management Preparing for Web Management System Login Online Help Port status Port Statistics View the Port Information Administrator Administrator function, it provides the following functions Switch Setting IP Address „ MAC Address Table Entry Basic Switch SettingsAdvanced Setting Default is 300 seconds Miscellaneous Setting „ Igmp Theory of Operation Page Console Port Information Port Controls Trunking Aggregator setting Aggregator Information Aggregator Information State Activity Trunking State Activity interface Forwarding and Filtering Igmp Snooping Static MAC Address MAC filtering Vlan configuration Port-based Vlan Vlan PortBase interface 802.1Q Vlan „ Basic Acceptable Frame type Spanning Tree „ Forward Delay Time forward delay time System ConfigurationPer Port Configuration Port Mirroring Prot Mirroring interface Snmp Management „ System Options „ Trap Manager Security Manager„ Community strings 802.1X 802.1x Configuration Per Port Configuration Tftp Update Firmware Configuration Backup Tftp Restore Configuration Factory Default Tftp Backup ConfigurationBackup File Name fill the file name „ Default IP address „ Default Gateway „ Subnet mask IP Stacking System RebootPanel List IP Stacking interface IP Stacking master switch configure finished interface IP Stacking Finished configuring interface „ Faulty or loose cables Incorrect connections„ Non-standard cables „ Improper Network Topologies Diagnosing LED Indicators „ Cabling Switch architecture LED IndicatorsConnector Standard Dimensions Power SupplySafety MAC address