Basic
1.Click Add button.
2.Enable GVRP Protocol: check the check box to enable GVRP protocol.
3.Group Name: assign a name for the new VLAN.
4.VLAN ID: fill in a VLAN ID (between
5.Protocol VLAN: choose the protocol type. Default is NONE.
6.From the Available ports box, select ports to add to the switch and click
Add button. If the trunk groups exist, you can see it in here (ex: TRK1, TRK2…), and you can configure it is the member of the VLAN or not.
802.1q VLAN
7.Click Next . Then you will see the page as follow.
84