STP Setup
You must enable Spanning Tree function before configure STP function.
1.Select <Edit>
2.Use “Space” key to select the option.
3.Select <Save>.
STP Setup interface
System Configuration
You can configure the STP system parameter after enable the STP function. You can
view spanning tree information about the Root Bridge on the left.
1.Select <Edit>
2.Priority: assign path priority number.
3.Max Age: the maximum path age
4.Hello Time: the time that controls switch sends out the BPDU packet to check STP current status.
5.Forward Delay Time: forward delay time.
6.Select <Save>.
41
